Same as LC-R127R2P except with 6.35mm wide terminals instead of 4.8mm wide.
Product Details
Model No | LC-R127R2P1 | ||
Inventory Code | 46001-566D | ||
Categories | Portable Power Product Batteries Secondary (Rechargeable) Sealed Lead Acid (SLA-VRLA) Batteries Sealed Lead Acid Valve Regulated (AGM) Batteries Cyclic & Standby Type |
||
Selling Unit | EACH | ||
Description | Sealed Lead Acid Battery,Valve Regulated (AGM Type) | ||
Application | Cyclic & Standby,UPS, Security, Alarm, Instrument, Test Equipment, Toy, Medical Equipment | ||
Chemistry | Sealed Lead | ||
Voltage | 12V | ||
Nominal Capacity | 7.2Ah | ||
Watt Hour | 86.4Wh | ||
Width | 64.5mm | ||
Height | 94mm | ||
Length/Breadth/Depth | 151mm | ||
Weight | 2470g | ||
Brand |
When the Battery light shows it is time to replace the battery this is usually evey 3-5 years
The usual procedure to change the battery is:
1. Open the panel (the battery is usually located inside)
2. The Tamper alarm will sound
3. Enter your Pin Number this will turn the alarm off
4. Check the battery Part Number, Size, Voltage and Amp Hour rating of the battery
5. Close the Panel Re-Enter your Pin Number to set the Alarm, then in some cases again to put the alarm on standby
When you have purchased your 12 Volt 7 Amp Hour battery repeat 1-3
6. Take care not to pull on the wires when removing the battery connectors and make sure you replace them on the corresponding terminal of the new battery
Then repeat step 5
Reviews
There are no reviews yet.